Prepare Your Mailbox for the Holiday Season!

We know time flies, so it’s never too early to prepare for the holiday season. This week, we are delivering information about Gibraltar and Architectural Mailbox. 

Gibraltar is now known as Architectural Mailbox. But don’t worry, we still carry options for you! Just supply us with your model information, and we can provide you with the correct option. 

We have the BLANK01 key blank for pedestal and Hudson mailboxes and the BLANK02 key blank for select post mount mailboxes. 

We also carry replacement cam locks and keys. First is the CAMSET01 which is used on Gibraltar Mailboxes PED and HWVK mailbox locks. Then there is the CAMSET02 which is used on locking post mount mailboxes Gibraltar MB981, MLM16, and WM16. Finally, we have the LOCKSTAM which is used for Gibraltar PED, BWKH, WWVK, HWVK, WM16, MSK, 1250, THVK, and DVK mailbox locks. The LOCKSTAM includes a replacement lock, 5 different throw latches, two keys, and installation instructions.  

Find all of our mailbox keys, key blanks, and locks here!

No Lock, No Problem - Let Us Help!

Does your furniture have a punch out hole? We can help & provide you with everything needed!

If there is a punch out hole, and a locking arm on the inside of your furniture, the first step is to determine the manufacturer. The manufacturer label is typically located on an outside corner, the underside of the top shelf, a drawer, or on the locking mechanism. 

If the manufacturer is HON, we recommend our FC-10 lock. This lock can be used in Hon furniture that has a round punch out and an internal locking bar. If the punch out hole is oval, just add the FC26-AR adapter ring – this will convert the FC-10 to fit the oval punch out. 

If the furniture is any other manufacturer, we recommend ABUS file locking bars. The locking bars are a more economical solution compared to a turn or push-in style locking mechanism. ABUS file locking bars are constructed of 16-gauge steel, are reversible for left or right side mounting, and available in five different lengths. Mounting screws and 3/32” drill bit included. 

Have questions about your furniture? Contact our customer service and let our experts help!

Mix It Up with EasyKeys

Did you know lock cores can be changed? Lock cores are the cylinders that fit into the lock mechanism and is where the key is inserted. Specific to each manufacturer and lock code, lock cores can be “keyed alike” or “keyed differently.” Keyed alike means that the locks will all operate using the same key – these lock cores have the same manufacturer and lock code. Keyed differently means the locks will operate using different keys. Check out all of our available lock cores here!
 
If you would like to make life easier (and who doesn’t?), the lock cores can be switched out to use the same key – as long as the lock cores are within the same manufacturer and series.
 
Changing lock cores brings us to control keys. Control keys are keys required for the removal and installation of lock cores. This key does not lock or unlock the lock. Control keys can also be known as pull key, change key, and core removal tool. Find the control key for your specific manufacturer and series here!
 
Sometimes lock codes can be difficult to read. A handy tool to make it easier is the EasyKeys Magnifying Card Light. This magnifying glass includes a light as well as a small ink pen. No matter the location, our card light will brighten and magnify the lock code. Small enough to carry in your pocket or purse, this tool can be used anywhere – even for restaurant menus!
 
Find additional information and instructions for replacing lock cores on our Support page.

Take the Plunge with EasyKeys!

First up this week, we have the ESP Flush Mount Plunger Lock Package. This plunger lock was designed for by passing wood doors, and has a bright nickel finish. Available keyed alike or keyed differently, this package includes a nickel cup strike, 2 mounting screws, and 2 keys. 
 
Next, we have the Olympus Lock Plunger Lock.  This lock is most commonly used on wood or metal furniture sliding doors. The lock features a rekeyable cylinder via its speed release mechanism. A bolt extender is included for varying gaps between bypassing doors. This lock is available in satin chrome, polished brass, and oil rubbed bronze.
 
Finally, we have the Wesko Push Button / Plunger Lock. This lock is meant for cabinets where a plunger / push button lock is applicable. This Wesko Push Button lock has a 90 degree key rotation, and comes in a chrome finish. A small adapter piece is included so that it is easily rekeyable with Wesko W series lock cores. 
 
Still looking for the right Push Button / Plunger Lock? Check out all of our options here!