First up this week is the CCL Lever Lock Handle. This lock handle is furnished for one, two, or three point locking, right or left hand doors, and with 90 or 180 degrees rotation. The square spindle allows cams to be mounted at 12, 3, 6, and 9 o’clock. The regularly furnished spindle length is 25/32” and 3-1/2” long, and the mounting hole dimensions are 1 ½” from center to center. A plug removal access hole is on the shank of the handle to allow for removal of plug assembly for rekeying purposes.
Next is the CompX National L-Handle Keyed Cam Lock. This lock handle is made of zinc die-cast and has a chrome plated finish. The mounting hole dimensions are 1 13/16” from center to center with the cam length at 3 inches. With the unlocking radius of 90 degrees, the unlock turn direction is clockwise. This cam lock includes two keys and mounting hardware with the keyway keyed to C415A.
Finally, we have the Tennsco Lock Handle. These are OEM Tennsco lock handles and replace the SC100 – SC899, BP500 – BP999, and CH501 – CH620 series handles. Each comes with a lock handle and a dummy handle (single lock handles with no dummy handle are also available here). The mounting hold dimensions are 1 ½” from center to center and come in a polished chrome finish.
No comments:
Post a Comment